Speroni Self priming Trash water Pump HGM50 – 1.1 – 1.5HP– 7920 GPH – 2″ – 60Hz
916.00$
This self-priming monoblock water pump features an open impeller design, making it ideal for handling clean or slightly dirty water. Equipped with an internal check valve at the suction outlet, the pump prevents siphoning when stopped and ensures automatic re-priming during every start.
Even if the pump is only partially filled and the suction hose is completely empty, it will self-prime reliably—making it perfect for use in flood irrigation systems, water drainage, and general-purpose water transfer.
Made in Italy.
Description
Self-Priming Monoblock Water Pump with Open Impeller
Applications
This self-priming monoblock water pump features an open impeller design, making it ideal for handling clean or slightly dirty water. Equipped with an internal check valve at the suction outlet, the pump prevents siphoning when stopped and ensures automatic re-priming during every start.
Even if the pump is only partially filled and the suction hose is completely empty, it will self-prime reliably—making it perfect for use in flood irrigation systems, water drainage, and general-purpose water transfer.
Features
-
Open impeller design suitable for slightly dirty water
-
Built-in check valve to prevent syphon effect and support automatic restart
-
Self-priming capability even when suction hose is empty
-
Designed for irrigation, draining, and general water transfer
-
Continuous duty operation for long working cycles
Operating Conditions
-
Maximum liquid temperature:
-
95°F (35°C) for residential use (per EN 60335-2-41)
-
194°F (90°C) for other applications
-
-
Maximum ambient temperature: 104°F (40°C)
-
Maximum suction lift: 23 ft (7 m)
-
Duty cycle: Continuous operation
Motor
-
Voltage: Single-phase 220V – 60Hz
-
Motor type: Two-pole induction motor (n = 3450 rpm)
-
Insulation class: F
-
Protection rating: IP 55 (dust-protected and water jet resistant)
Materials
-
Pump body: Cast Iron
-
Motor support: Cast Iron
-
Impeller: Cast Iron
-
Shaft with rotor: Stainless Steel 304
-
Mechanical seal: Ceramic / Graphite / NBR
Technical Specifications
| Model | HGM50-1.1 |
| Brand | Speroni |
| Manufacturer’s Warranty | 1-year Limited Warranty |
| Impeller Material | Cast Iron |
| Port Size (in.) | 2 |
| Flow (GPH) | 7920 |
| HP | 1.5 |
| VoltsAMP | 220V – Single Phase 8.2 |
| Max. Total Head (ft.) | 62.3 |
| Max. Suction Lift (ft.) | 23 |
| Max. PSI | 27.5 |
| Suction Port (in.) | 2″ |
| Discharge Port (in.) | 2″ |
| Self-Priming | Yes |
| Dimensions L x W x H (in.) | 13.8″ x 7″ x 8.2″ |
| Product Weight (lbs.) | 56.4 |
Additional information
| Weight | 56.4 lbs |
|---|---|
| Dimensions | 13.8 × 7 × 8.2 in |
| Brand | |
| HP | |
| Phase | |
| Voltage |
Reviews (0)
Shipping & Delivery
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Reviews
There are no reviews yet.